Electronics

OEM CR2032 3V Lithium Battery used in most CatEye cycle computers.

Cadence Magnet for all CatEye computers that record cadence.

- Adapter converts Origin8 Outpost Garmin mounts to accept Bryton computers

Wheel magnet for all CatEye cycle computers

Get the most out of your ride with the addition of speed and cadence. Whether you are a weekend warrior or data junkie we’ve got you covered. Features - Sensor magnet kit for RideSense speed and cadence sensors Kit includes: - RideSense speed magnet - RideSense cadence magnet

The H-34 Flex-Tight Bracket is an OEM handlebar bracket so you can attach Cateye accessories. It fits all handlebars up to 32mm in diameter.

The cadence magnet pedal insert is designed for tight installation situations. The principle is simple, yet space-saving: the power magnet attaches to any steel pedal spindle by magnetic force alone. From there, it triggers the cadence transmitter with each crank revolution.

Sigma Sport's Cadence Power Magnet is the correct replacement magnet for any Sigma Sport computer featuring cadence (computers sold separately). It attaches to your crankarm with zip ties and double-sided tape (both included).

Power Spoke magnet for all Sigma computers. Fits round and bladed spokes.

Replace your worn or damaged wiring on Origin8 wired computers (97517 / 97570) - Includes bracket with (155cm) wired sensor, screw magnet and 4 cable ties - Includes: Wiring Kit - Compatibility: Data Station 8 / 10 ** HEAD mount is HANDLEBAR mount only (not stem)

Keep your computer where you can read it with Delta's stem bolt-mounted Computer Caddy. It provides a mounting point for awkward or crowded bars. - Mounts securely using the stem bolt - Adds a space to mount up to two devices - Weight limit of 125g (0.28 pounds) per side

Replacement mount tray for Giant/Liv computers

Need to hold down your GoKASE or DriKASE iPhone case? If you have multiple bikes, an ATV, or stroller, the Xtended X Bracket will allow multiple mountings with GoKASE or DriKASE iPhone cases. • Fits handlebar diameters 22mm to 34mm

Mount your Garmin Edge computer with the Quarter Turn Bike Mount. It includes the bike mount, rubber disc, and elastic bands to secure the Quarter Turn to your stem or handlebars.

Wire harness and hardware to measure computer data based on the rear wheel - Contains bracket with 130cm wire, wheel magnet (fits up to 4mm bladed spokes) and zip ties - Bracket fits most bars (25.4 to 31.8mm) - Compatible with: Protegé 5.0, 8.0 and 9.0 - Ideal for rear wheel indoor bicycle trainers

PWR Helmet/GoPro Mount - for holding charger and modular lights on top of helmet (Excludes PWR Mountain). Tri-prong system works with GoPro, so can be used to mount lights under Garmin and other mounts. - Compatibility: Works with PWR Charge and Modular lights (not PWR Mountain) - Mounting system: Designed to fit most vented helmets, common for road and trail cycling and is GoPro compatible - T Slot (For modular): Allows for quick release of the light when parking your bike - Weight: 20g

Specifically designed for the RideCase series, the RideCase ArmBand conveniently holds your smartphone and is perfect for indoor and outdoor activities. The wide medical grade elastic band and silicone grip provides extra comfort and security while the 3M reflective highlight adds a margin of safety in low light conditions. - Material: Elastic band & engineering grade plastic - Attachment: Hook and loop fastener - Compatibility: RideCase & SmartPhone DryBag series - Fit Arm: 17-45 cm / 6.7”-17.7” - Size: 11.2 x 6.8 cm / 4.4” x 2.7” - Weight: 40 grams

Protect your Garmin Edge 800, 810, or Touring with a form-fitting, silicone case and keep your mind at ease. Choose from a variety of cool colors to match your personal style.

Protect your Garmin Edge 800, 810 or Touring with a form-fitting, silicone case and keep your mind at ease.

CatEye's Out Front Bracket frees up your handlebars and positions your favorite CatEye computer just in front of your stem for optimal viewing and accessibility.

Bryton "Rider" series Handlebar Mount

Features - Mounts underneath Contact SLR Aero Integrated handlebars - Adjustable length - Alloy construction - Hardware included

- Use to keep Blips in place on handlebars - Fits 31.8mm round portion of drop bar - Clamp mounts directly to bar outside of tape zone - Ideal for use with thumbs or index fingers while hands are on the tops - Right and left specific, just like Blips - Weight: 12 grams (for pair) - Material: Polypropylene - Compatibility: 11-speed - Recommended Group: SRAM RED eTap

Keep your handlebar organized and your devices secure with the SGS-400-OS (27.2/31.8/35.0mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 27mm-35mm diameter

Keep your handlebar organized and your devices secure with the SGS-400-STD (22.2/25.4/28.6mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 22mm-29mm diameter

Keep your handlebar organized and your devices secure with the SWG-400 (28/35mm) SwingGrip from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - On Stem installation only - Lightweight and rustproof alloy construction - Angle adjustable arm design - Aluminum bar is position adjustable and uses Hex Bolt to install and remove

Gain more room or find the perfect position for lights, computers, music players, GPS, or whatever, with the Topeak BarXtender. Attaches securely to the handlebars or stem and adjusts for optimum position. - Clamp: Fits 22-38 mm tubes (shims included) - Crossbar: Device mount bar 25.4 mm - Material: Engineering Grade Plastic and Steel - Mount: Handlebar, Handlebar Stem - Size (L x W x H): 18 x 3 x 3 cm, 7.1” x 1.2” x 1.2” (folded) - Size (L x W x H): 13 x 10 x 3 cm, 5.1” x 3.9” x 1.2” (open) - Weight: 116 g / 4.08 oz

Molded with Polycarbonate and Silicone rubber. Mounts to bike frame with rubber oring or use braze ons on bike. The 2 elastic bands will hold a phone, energy bar, pump, or sunglasses.

Mounting your phone in your car is almost a necessity these days. At BiKASE, we promote hands-free driving. Playing on your phone is never a good idea, whether it’s texting, social media, reading emails or talking, our goal is for every driver on the road to be safe and alert! We have found that people, while driving, often fumble with their phone while using GPS apps and need a convenient way to view where they are going. The BiKASE Uni Mount eliminates setting your phone in the seat next to you, or putting it in a cup holder, or worse yet, having the phone in your hand. In all these situations, you take your eyes off the road! In addition, we have tried other products that attempt to solve this problem. Other vent mounts attach to 1 louver in the vent and often fall off when hitting a bump in the road. Our patent pending bracket uses heated spring steel that won’t break and securely holds the bracket into place. Then, we use very powerful N48 magnets that hold your phone to the adhesive brushed stainless steel disc. The disc is either attached to your phone, to your case, or placed between your phone and case. It’s simple and it works!