Safety

The Mirrycle mounts in minutes with the wrench that is included. The mirror is a 3" round, convex glass mirror with a wide field of view. The mirror is adjustable to any viewing angle. - Fits inside handlebars with 13.75mm – 22.5mm (.54" to .875") inside diameter

- Made in the USA - Wide field of view with three pivot points for total adjustability - Lightweight and optically correct - Fits helmet visors and eyeglasses; will fit helmets with adapter

The Mirrycle Jellibell is a fun way to let pedestrians and other riders know you're coming! The Jellibell has a see-through top so you can see the gears spin as it rings. It's weatherproof, too! - Dome Diameter: 48mm (1.9") - Fits handlebars with 21mm – 22.5mm (.83" – .89") outside diameters

- 115 decibel horn with volume control switch - Mounts to most handlebars - Air reservoir is easily refilled with any bike pump - no batteries needed - Extension allows for more versatility when mounting

Mirrycle's Incredibell Brass Duet makes a traditional ding-dong dual-tone ring with the beautiful resonance of solid brass. Plus, its compact size lets you mount it just about anywhere on your handlebars. - Dome Diameter: 33mm (1.3") - Fits handlebars with 21.7mm – 24mm (.86" – .95") outside diameters

Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? A bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Small Oi fits 22.2mm diameter bars, e.g Mountain bike (near the grips), BMX & some old commuters. Please make sure you know where on your handlebar you are going to place the bell (grips or stem) before you order as you may need a different sized bell. THE LOOK Where bells usually protrude up or out, Oi doesn’t. It appears to hover around the handle bars. In one sense, it's discreet. But in another, it stands out as unrecognisable. THE SOUND Knog tested numerous prototypes to get the perfect pitch, length of ring, and volume. With a spring-loaded actuator built into the mount, the strike of the bell is firm and fast, allowing a good balance of volume and longevity of sound. It actually has several pitch tones - one core and several supportive higher tones to ensure it's unmistakable and safely heard. To compare it to a musical instrument, where some bells play a single note, Oi plays a chord. THE MOUNT What about the handle-bar cables? No worries. Built into the shape of the mount is a cable management system. So not only does it allow the bell to look and sound uninterrupted, it also helps gather your cables (for the organiser inside us all). What about getting it on the bar. Again, not a thing. Just pop it over, give the hex screw a quick tighten up, and you're good to go. No sliding down the handlebars, no dismantling and re-assembling.

Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? A bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Large Oi fits 23.8 to 31.8mm bars e.g. drop bar road bikes and some cruiser / commuters. Please make sure you know where on your handlebar you are going to place the bell (grips or stem) before you order as you may need a different sized bell. THE LOOK Where bells usually protrude up or out, Oi doesn’t. It appears to hover around the handle bars. In one sense, it's discreet. But in another, it stands out as unrecognizable. THE SOUND Knog tested numerous prototypes to get the perfect pitch, length of ring, and volume. With a spring-loaded actuator built into the mount, the strike of the bell is firm and fast, allowing a good balance of volume and longevity of sound. It actually has several pitch tones - one core and several supportive higher tones to ensure it's unmistakable and safely heard. To compare it to a musical instrument, where some bells play a single note, Oi plays a chord. THE MOUNT What about the handle-bar cables? No worries. Built into the shape of the mount is a cable management system. So not only does it allow the bell to look and sound uninterrupted, it also helps gather your cables (for the organizer inside us all). What about getting it on the bar. Again, not a thing. Just pop it over, give the hex screw a quick tighten up, and you're good to go. No sliding down the handlebars, no dismantling and re-assembling.

- Shatter-Proof aluminized glass mirror, Resists discoloration - Mounts on either side of helmet offering a wide range of adjustment - Mirror and/Or arm can be detached from helmet mount - Adhesive backed plastic fan-Plate fits most helmets

The Mirrycle Road Mirror was developed exclusively to fit Shimano STI shifter/brake levers without interfering in any way. The Road Mirror fits almost all the different shift/brake combos. It goes on quickly and easily with the included tools. Just a flick of your eyes allows for a quick view behind. And, it can be attached to either the left or right side lever. Let's be careful out there.

Mirrycle's Incredibell Adjustabell 2 uses a fully adjustable handlebar clamp that fits any size bars. Its perfect size and pivoting ringer let you mount it just about anywhere on your handlebars, and allows you to ring it with your thumb or finger. The Adjustabell 2 can even be mounted to a ski pole or walking stick. One flick and it rings loud and clear for all to hear. - Weight: 26g (.9oz) - Dome Diameter: 34mm (1.34") - Fits handlebars with 15mm – 39mm (.59"- 1.54") outside diameters

- The original third-Eye eyeglass mirror design - Shatter-Proof aluminized glass mirror, Resists discoloration - Mounts to left or right sun/Eyeglass temple-Arm - Rubber-Tipped outer prongs provide a no-Slip mount

• Front reflector (white) • Rear reflector (red)

The best thing to happen to handlebars since grips. - Easy to push lever creates friendly ringing sound - Fits standard bicycle handlebar - Includes attachment hardware

The best thing to happen to handlebars since grips. - Easy to push lever creates friendly ringing sound - Fits standard bicycle handlebar - Includes attachment hardware

How you say "hello" in Electra. - Oversized bell with cheerful "ding-dong" doorbell style ring - Fits standard bicycle handlebar - Includes attachment hardware

- Great novelty horn - Fits most handlebars

Let everyone know your coming with Sunlite's I Love My Bike Bell. It makes the classic "ring-ring" sound that everyone loves. It fits most bars and can be used right or left handed.

Available with either polished brass or chrome plated dome. Striker can be adjusted for individual comfort. - Dome Diameter: 45mm (1.7") - Fits handlebars with 22mm – 25.4mm (.86" – 1") outside diameters

• Reflector on back • Extra large • 6" stem

Let everyone know your coming with Sunlite's Big Ben Jr. Bell. A simple spin makes the classic "ring-ring" sound that everyone loves. It fits most bars and can be used right or left handed.

Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? The Oi Luxe is a bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Oi Luxe is luxe in every sense of the word. Its CNC machined ringer and brass dinger, stitched 'vegan' leather shim, and metal injection molded stainless steel make it a pleasure to have on your handlebars. - Fits 23.8 – 31.8mm handlebars - Weight: 46.5g

Let other cyclists and pedestrians know you're there by ringing your Planet Bike Courtesy Bell. This minimal bell has a striker that rotates 360 degrees so you can place it wherever you need it for easy access. And it fits on handlebars with diameters from 22.3 to 26mm.

Accessorize your bike in a way that announces your presence in style. The omni-directional rotating top produces a clean, clear, loud ring. - Fits handlebars with 22.2mm - 31.8mm (.87-inch - 1.25-inch) outside diameters - Dome Diameter: 44mm (1.6")

- Adjustable handlebar mount - Universal nylon clamp - Ringer style bell - Function: Lever

The Wide Ankle Strap is made from upcycled bicycle inner tubes. Keep your pants clean, strap together your skis, roll up your yoga mat, or use it to secure gear to your pack. This incredible strap has a multitude of uses. - Materials: Upcycled Bicycle Inner Tubes and Hook & Loop - Dimensions: 2 H x 16 W x 0.25 D in. (50.8 x 406.4 x 6.35 mm) - Weight: 1.6 oz. (45 g) Features: - Fully adjustable hook & loop closure - Reflective strip for nighttime visibility - Built in USA

Sunlite's Time Clock Mini Bell produces a clean, crisp sound from it's 40mm brass bell housing with stainless steel lever and CNC machined base. It's compatible with both 22.2mm and 25.4mm bars using included shims - Function: Mallet - Material: Brass - Color: Brass - Handlebar Mount: 22.2/25.4mm

Mirrycle's Candibell is more than just a fun, compact bell, it’s the loudest Incredibell of all. - Dome Diameter: 48mm (1.9") - Fits handlebars with 21.7mm – 24mm (.86" – .95") outside diameters

Let everyone know your coming with Sunlite's Ding Dong Bell. It makes the classic "ring-ring" sound that everyone loves. It fits most bars and can be used right or left handed.

Sunlite's HD I Mirror offers a nice, wide and clear view of what's behind so that you can ride more safely. It quickly and easily attaches to virtually any handlebar configuration. It's light and fully adjustable.

Origin-8's Ping Streamliner features a compact design and a clamp that fits 25.4-31.8mm handlebars.